Deal of the Day
(58% Off)
Hurry! deal ends in:

PAR-TEK LIGHTING 1000W High Frequency SE-DE Digital Ballast

Write a Review
On sale: $299.95 $149.97
MSRP:$359.99
You Save:$210.02(58%)
Part Number: PT1000FC
UPC:
PAR-TEK LIGHTING 1000W Digital Ballast operates on either 120v or 240v power supply. The PT1000FC Ballast is on the Dimmable Design Platform which operates a 1000W Lamp with the capabilities to DIM the lamp when less light is needed. PT1000FC can fire both High Pressure Sodium & Metal Halide Bulbs. This ballast can also fire Double Ended DE lamps in both MH & HPS as well, Ballast operates at High Frequency of 106KHz. Don't for get SUPER LUMENS which will give 10% more light at the flick of a switch. Optional settings are Super Lumens, 100%, 75%, & 60%. 

PAR-TEK LIGHTING Digital Ballast is A Performance Leader.

  • Operates both Metal Halide (MH) & High Pressure Sodium (HPS) lamps. Both DE and Standard Lamps
  • Dual Receptacle outputs make it a snap to connect with all types of reflectors in today's market, HydroFarm Lock n' Seal or Sunlight Standard connection type.
  • Dual Ferrite rings on Power input & Reflector connections for increased EMI protection.
  • Up to 30% MORE LUMEN OUTPUY then Magnetic Ballast; faster growth, bigger harvests.
  • Unique graduated fin design for more efficient cooling.
  • 3 years NO hassle warranty.
  • Internal resin coating protects components for a long life. (10 Year Life Expectancy)
  • Generator compatible.
  • Cuts off when a short is detected. For ultimate safety. VERY smart ballast !!
  • Completely silent.
  • View Pictures for all specs.

Notes: Includes 120V power cord. Please request a 240v if needed OR both for $5.00 more.

PAR-TEK Lighting ballasts are designed with internal microprocessors that will soft start lamps and intelligently detect the lamp voltage & line current to prolong ballast & bulb life hours. This ballast model is Dimmable which can save power at both input & output side. Ballast will Intelligently Stagger lamp ignition when grouped together to avoid inrush current overload. Perfect self-protection mechanism to prolong ballast life. Complete 3 year warranty. YOU MUST KEEP YOUR RECEIPT AS THAT SHOWS DATE OF PURCHASE FOR WARRENTY COVVERAGE. THANK YOU.

Dimmable Design:
Dimmable Ballast design can only run one rated wattage lamp. Dial in a four phase controller to set output of ballast to 100%, 75%, 60% OR Super Lumen which will boost light output more than 10%. Make sure to run your lamp continuously at each setting for 10 mintues before changing to other settings. Rapidly switching the settings may cause harm to lamp.

Dimmable ballasts will dim down the rated lamp wattage for your particular ballast model to LOWER wattage only. For example with PT1000FC, dial the knob to 60% setting and the ballast will dim down input and output power both to 60%, which will save you energy cost. You cannot increase power of 600W lamp to 1000W setting "Over-Driven" will severely damage your lamp.

Super Lumens setting can increase your rated lamp power by approximately 10% at the flick of a switch. That is 10% more Lumen output to your garden. More Lumen Output = HIGHER YIELD

Staggered Ignition:
When grouped together using PAR-TEK LIGHTING ballasts, they will separately and randomly ignite lamps within 7 seconds to reduce inrush current.

Self-Protection Mechanism:

Input Protection
High / Low Voltage, Lightening Strike/ Inrush Current / Pulse Group, Over Current, Brown Out.

Output Protection
Open Circuit, Short Circuit, End of Lamp Life, Ignition Failure, Over Voltage, Rectifying Effect Protection.

Overheat protection
During operation, inner heat will dissipate through aluminum casing. When case temperature rises to 85?, Ballast will gradually reduce power to 80%. When case temperature reach to 90?, Ballast will stop working until it cools down to 70?, then returns to full power status.

Ballast Parameters:
Model: PT1000FC
Lamp: 1000W Lamps in both HPS or MH Lamps in both Single Ended & Double Ended "DE"
Ignition voltage: < 4KV
Input Power: 1061W
Input Voltage: 120V or 240V, 50/60Hz
Input Current: 8.84A @120V / 4.42A @ 240V
THD: < 8%
Lamp CCF: < 1.7
Power Factor: >0.99
Input Voltage Range: 95V-264V
HIGH Output Frequency: >106KHz   <<<----- Most Ballast on the market are only 30KHz, Ours are much better quality.
Ambient Temperature: -25 to 40 C (-13 to 104 F)
Enclosure Temperature rise: 35 C (95 F)
Inrush Current: <30A
Input current protection: Internal Fuse
Lamp Flicker/Acoustic Resonance: NO
RF Interference: NO
Environment IP Require: >IP23
Open circuit voltage: <300V
Unit Weight: 4.5kg
Unit Dimension: 14.33" X 7.65" X 3.17"


Pair with our PAR-TEK LIGHTING bulbs for optimal performance as they have been fine tuned to work together, We currently have:
PT1000HPS = 1000W High Pressure Sodium
PT1000MH-6K = 1000W Metal Halide 6500K
PT600HPS = 600W High Pressure Sodium
PT600MH-6K = 600W Metal Halide 6500K



Distributed exclusively by: BAY HYDRO LLC, Loomis CA. 95650 / 916.824.1556

Accessories

Browse Similar Items

Recently Viewed Items

TOP