Multi-Wattage Design:
Multi-Wattage ballasts will properly drive a 250w, 400w, or 600w lamp to ANSI specifications. For example, set the switch to 400w, insert a 400w lamp into your socket and the ballast will operate the 400w lamp correctly. Our ballast will similarly operate 250w, 400w, 600w or 1000w lamps. Depends on ballast model you have.
Super Lumens setting can increase your rated lamp power by approximately 10% at the flick of a switch. That is 10% more Lumen output to your garden. More Lumen Output = HIGHER YIELD
Staggered Ignition:
When grouped together using PAR-TEK LIGHTING ballasts, they will separately and randomly ignite lamps within 7 seconds to reduce inrush current.
Self-Protection Mechanism:
Input Protection:
High / Low Voltage, Lightening Strike/ Inrush Current / Pulse Group, Over Current, Brown Out.
Output Protection:
Open Circuit, Short Circuit, End of Lamp Life, Ignition Failure, Over Voltage, Rectifying Effect Protection.
Overheat protection:
During operation, inner heat will dissipate through aluminum casing. When case temperature rises to 85?, Ballast will gradually reduce power to 80%. When case temperature reach to 90?, Ballast will stop working until it cools down to 70?, then returns to full power status.
Ballast Parameters:
Model: PT600TWIN
Lamp: 600W, 400W & 250W in both HPS or MH Lamps
Ignition voltage: <4KV
Input Power: 650W X 2 = 1300W Total, When both 600w Lamps on.
Input Voltage: 240V, 50/60Hz
Input Current: 2.68A Each Lamp @ 240V
THD: < 8%
Lamp CCF: < 1.7
Power Factor: >0.99
Input Voltage Range: 175V-264V
Output Frequency: >60KHz <<<----- Most Ballast on the market are only 30KHz, Ours are much better quality.
Ambient Temperature: -25 to 40 C (-13 to 104 F)
Enclosure Temperature rise: 35 C (95 F)
Inrush Current: <30A
Input current protection: Internal Fuse
Lamp Flicker/Acoustic Resonance: NO
RF Interference: NO
Environment IP Require: >IP23
Open circuit voltage: <300V
Unit Weight: 5.5kg
Unit Dimension: 21.5" X 4.48" X 3.18"
Pair with our PAR-TEK LIGHTING bulbs for optimal performance as they have been fine tuned to work together, We currently have:
PT1000HPS = 1000W High Pressure Sodium
PT1000MH-6K = 1000W Metal Halide 6500K
PT600HPS = 600W High Pressure Sodium
PT600MH-6K = 600W Metal Halide 6500K
WWW.PARTEKLIGHTING.COM
Distributed Exclusively BY: BAY HYDRO LLC Loomis, CA. 95650 / 916.824.1556